Xian Tiangong Electric Co., Ltd.
EN
Search
×
d78 series mov for line surge arrester
metal oxide varistor datasheet
metal oxide varistor specifications
metal oxide varistors how does it work
d78 series mov for line surge arrester
metal oxide varistor datasheet
metal oxide varistor specifications
metal oxide varistors how does it work

D78 Series MOV Block for Line Surge Arrester

The D78 Series MOV for Line Surge Arrester is a highly reliable surge protection device designed to protect electrical systems from power surges. It is a three-phase, single-stage MOV block that features robust construction and is specifically designed for installation in 750-1000kV line surge arresters. This series of MOV varistor blocks is designed with a high-speed response, providing a fast response time to protect against both transient and steady-state overvoltages. As a reliable mov selection for surge protection, the D78 Series surge arrester mov provides excellent protection for both indoor and outdoor applications, making it an ideal solution for high-voltage surge protection.

TGE Specification of D78H22.5 Metal Oxide Arrester Blocks


Type

D78H22.5

Nominal discharge current In kA

20

Suggested rated voltage kV

3.24

Diameter mm

78±1

Height mm

22.5±0.3

AVG Gradient V/mm

205

DC U1mA kV

4.61±0.30

Iref mA

5

Uref kV

3.26

Ures kV

8.21±0.54

8/20uS repetitive charge transfer Qrs C


2ms repetitive charge transfer Qrs C

3.6

2ms duration of rectangular impulse current A

2000

4/10µs high current test kA

100

Accelerated ageing test Kct

≤ 1.0

Note:

  • The nouns, parameters and corresponding test methods in this parameter list conform to the standards of IEC60099-4:2014 and GB11032-2020.

  • The rated voltage, power frequency reference current and power frequency reference voltage are reference values.

  • The 2ms square wave tolerance value is based on the declared current/2ms repetitive charge transfer charge Qrs=423, if the actual test waveform 2ms current/2mS repetitive charge transfer charge Qrs is not equal to 423, it should be corrected according to the actual 2ms current waveform and Qrs value.

  • The charging rate of the aging test was 90%.

  • The number of pulses for the high current withstand value is two.




TGE Specification of D78H35.4 Metal Oxide Arrester Blocks


Type

D78H35.4

Nominal discharge current In kA

10

Suggested rated voltage kV

5.38

Diameter mm

78±1

Height mm

35.4±0.5

AVG Gradient V/mm

215

DC U1mA kV

7.61±0.40

Iref mA

5

Uref kV

5.38

Ures kV

12.41±0.66

8/20uS repetitive charge transfer Qrs C


2ms repetitive charge transfer Qrs C

3.6

2ms duration of rectangular impulse current A

2000

4/10µs high current test kA

100

Accelerated ageing test Kct

≤ 1.0

Note:

  • The nouns, parameters and corresponding test methods in this parameter list conform to the standards of IEC60099-4:2014 and GB11032-2020.

  • The rated voltage, power frequency reference current and power frequency reference voltage are reference values.

  • The 2ms square wave tolerance value is based on the declared current/2ms repetitive charge transfer charge Qrs=423, if the actual test waveform 2ms current/2mS repetitive charge transfer charge Qrs is not equal to 423, it should be corrected according to the actual 2ms current waveform and Qrs value.

  • The charging rate of the aging test was 90%.

  • The number of pulses for the high current withstand value is two.




TGE Specification of D78H35.4B Metal Oxide Arrester Blocks


Type

D78H35.4B

Nominal discharge current In kA

10

Suggested rated voltage kV

5.89

Diameter mm

78±1

Height mm

35.4±0.3

AVG Gradient V/mm

235

DC U1mA kV

8.32±0.40

Iref mA

5

Uref kV

5.91

Ures kV

13.39±0.66

8/20uS repetitive charge transfer Qrs C


2ms repetitive charge transfer Qrs C

3.6

2ms duration of rectangular impulse current A

2000

4/10µs high current test kA

100

Accelerated ageing test Kct

≤ 1.0

Note:

  • The nouns, parameters and corresponding test methods in this parameter list conform to the standards of IEC60099-4:2014 and GB11032-2020.

  • The rated voltage, power frequency reference current and power frequency reference voltage are reference values.

  • The 2ms square wave tolerance value is based on the declared current/2ms repetitive charge transfer charge Qrs=423, if the actual test waveform 2ms current/2mS repetitive charge transfer charge Qrs is not equal to 423, it should be corrected according to the actual 2ms current waveform and Qrs value.

  • The charging rate of the aging test was 90%.

  • The number of pulses for the high current withstand value is two.




Features of D78 Series MOV for Line Surge Arrester


Features of D78 Series MOV for Line Surge Arrester


The D78 Series surge arrester mov is a reliable and efficient way to protect power lines from overvoltage and high-energy surges. This surge arrester mov block is designed for use in 750-1000kV line surge arresters, making it a perfect fit for a wide range of applications. It features advanced technology that ensures superior performance and reliability. With a slim design, the D78 Series MOV is easy to install and maintain. Contact metal oxide varistor manufacturer TGE for more mov blocks.

Products
Do you have any questions regarding MOV blocks or MOV disks?
Do you have any questions regarding MOV blocks or MOV disks?

Welcome to TGE's Customer Connect Center. Experienced specialists are here for you 365 days a year.

E-mail:
tge@xatge.com
Address:

No.1616 TianZhang Avenue, Feng Dong Xin Cheng, Xi'an, China.

Get In Touch With TGE

Your Name *

Your Email *

Your Phone

Company

Your Message *

Related MOV Block for Line Surge Arrester

Latest News & Blogs about TGE
Technology Training of Surge Arrester
08 Jul 2024

Technology Training of Surge Arrester

Siemens Energy Supplier Day 2024
05 Jul 2024

Siemens Energy Supplier Day 2024

The First Summer in the New Factory
21 Jun 2024

The First Summer in the New Factory